Reasons for wrinkles in stretched film
Source：Reasons for wrinkles in stretched filmTime：2019-04-28Visitors：
The use of stretched film will cause wrinkles after a period of time, which has a very large effect on the use effect. What is the reason for the wrinkles of the stretched film? Let me introduce it below!
1. The thickness of the stretched film substrate is not uniform, and the thickness difference is too large.
2. The position of the stretched film substrate is skewed, which causes the composite film to wrinkle, and as the skewness increases, the degree of wrinkles will increase accordingly.
3. The tension film tension setting and control are improper, and the tension of each part is not coordinated or matched.
4. The composite pressure of the stretched film is not properly set.
5. The axis between the silicone rubber press roll and the cooled steel roll is not parallel.
6. The surface of the guide roller is not clean, there is foreign matter stuck, or the surface of the guide roller is not flat, and there are pits, scribes, bumps and the like.
1. The thickness of the stretched film substrate is not uniform, and the thickness difference is too large.
2. The position of the stretched film substrate is skewed, which causes the composite film to wrinkle, and as the skewness increases, the degree of wrinkles will increase accordingly.
3. The tension film tension setting and control are improper, and the tension of each part is not coordinated or matched.
4. The composite pressure of the stretched film is not properly set.
5. The axis between the silicone rubber press roll and the cooled steel roll is not parallel.
6. The surface of the guide roller is not clean, there is foreign matter stuck, or the surface of the guide roller is not flat, and there are pits, scribes, bumps and the like.
Recommended Products
Ranked in the same article
- how to use the stretch film technology to r
- How can we get detailed price list？
- Five common quality problems of PE protecti
- Plastic film degradation
- How to guarantee punctual shipment for our
- Gauge to Micron and Millimetre Conversion G
- What is the difference between stretch film
- Testing the permeability of stretch film
- Stretch film temperature requirements
- Electrical wire film VS electrostatic film
- Why insufficient transparency of stretch w
Latest news articles
- How to check the quality of PE stretch film
- How can PE stretch film be cut better?
- What Properties Ensure Effective Cold Chain
- The 133rd Spring Canton Fair
- The Ultimate Guide to Choosing the Right Ma
- The significance of using PE electric wire
- Bundling Stretch Film: Optimize Your Packag
- Stretch Film Wrap: Unraveling Its Benefits
- Factors affecting viscosity of PE stretch f
- Advantages of white engineering film
- What is the Difference Between Magic Tape a
