Notes for using PE stretch wrapping film
Source：Notes for using PE stretch wrapping filmTime：2020-09-21Visitors：
There is more and more demand for pe stretch film nowadays, but many people don’t know the precautions of using pe stretch wrapping film, so a lot of stretch film is wasted. Today I will introduce you to use pe stretch wrapping film to wrap Precautions for the membrane.
First, if there are burrs on the pe stretch wrapping film, it will cause the customer to break when it is used. Pay attention to the maintenance of the edges when packing, and no collisions will cause the edges to break and cause quality problems. The problem, as long as there is a little crack, there will be quality problems. This is also a problem reported by many customers, and there should be no burrs.
Second, if it is not cut neatly, it cannot be shipped as a waste product, including when making it, the two ends must be rolled neatly, and the edge material must be cut neatly. There should be no more than one side and less one side.
Third, try to minimize the appearance of wrinkles at both ends and the red pressing lines in the middle, which will seriously affect the aesthetics.
Fourth, one side cannot be long and the other is short. The standard of white space on both sides is about 1 cm, and the paper tubes must be aligned.
Fifth, the die must be cleaned, no black impurities, and no burnt plastic can fall into it. If it can be found by the naked eye, it must be removed immediately.
Sixth, in the process of transportation, it is best to fix the stretch film and not allow it to roll to reduce damage during transportation. In the process of product handling, the first thing to pay attention to is the packing of the product, and there should be no damage to prevent it from breaking when the customer uses it. Therefore, the edges of the product should be protected to prevent edge cracking.
Recommended Products
Ranked in the same article
- how to use the stretch film technology to r
- How can we get detailed price list？
- Five common quality problems of PE protecti
- Plastic film degradation
- How to guarantee punctual shipment for our
- What is the difference between stretch film
- Stretch film temperature requirements
- Testing the permeability of stretch film
- Electrical wire film VS electrostatic film
- Why insufficient transparency of stretch w
- The elastic characteristics of plastic film
Latest news articles
- What are the properties of wire film
- The use form of stretch film
- What are the benefits of using electrical w
- What is Electrical Wire Film
- The advantages of black film and the soluti
- What Size is a Shrink Film?
- Main raw materials and selection method of
- Does high temperature affect the stretch fi
- Detailed analysis:the difference between st
- Optimal Shrink Film Temperature Guide for 2
- We Offer High Quality Stretch Wrap Film
